EasyManua.ls Logo

Honeywell ACUIX - Table 3-11 HJZTP Joystick Operation

Honeywell ACUIX
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 55
02/08
Pan and Tilt
The joystick on the HJZTP controller is used to control the pan and tilt functions of the
ACUIX.
Lens Control
The lens iris is automatically controlled by the camera, but can be controlled manually
from the controller.
Iris
Press the + (OPEN) or - (CLOSE) keys to manually alter the iris of the camera. Press the
auto key above the iris control keys to put the camera in auto-iris mode.
Focus
Press the + (FAR) or - (NEAR) keys to manually focus the camera.
Note The auto key above the focus keys has no action when in Diamond protocol
mode. Auto focus control can be set using the domes OSD menus (see Auto
Focus, page 100), to come on when the camera is zoomed, or when the
camera undertakes a pan, tilt or zoom action.
Table 3-11 HJZTP Joystick Operation
Control Function
Joystick up
Joystick down
Joystick left
Joystick right
Tilt up
Tilt down
Pan left
Pan right
The speed of pan and tilt is relative to the amount of
movement applied to the joystick.
Joystick Knob Rotate the joystick knob clockwise and counterclockwise
to perform the zoom in and out functions, respectively.
The manual speed of the zoom function is set through the
on-screen setup menus under Camera Options.

Table of Contents

Other manuals for Honeywell ACUIX

Related product manuals