Honeywell ACUIX - Logging on; Changing the 4-Digit PIN; Table 6-1 Default User Pins

80
ACUIX Password Feature
Logging On
If the password feature is enabled, and the
user tries to access the ACUIX on-screen
setup menus, the Login Screen displays.
1. Enter the user’s 4-digit PIN. Move the
joystick up or down to select numbers
for each digit. Move the joystick left or
right to move between digits.
2. Press Iris Open to accept the
password and log in to the ACUIX.
3. Press Iris Close to exit the login screen without logging in.
Once a user enters a valid 4-digit PIN, the user can access the ACUIX setup menus.
Changing the 4-Digit PIN
1. Send the ACUIX to Preset 75.
2. Enter the Supervisory 4-digit PIN
(default = 1000). Move the joystick up
or down to select numbers for each
digit. Move the joystick left or right to
move between digits.
3. Press Iris Open.
4. Move the joystick down to position the
cursor on 2 Change PIN and press
Iris Open.
5. Move the joystick up or down to select
the numbers for each digit. Move the
joystick left or right to move between
digits.
Login to ACUIX
Enter 4-digit PIN .. ----
IRIS CLOSE to Exit
Table 6-1 Default User PINs
User PIN
0 (Supervisor) 1000
Enter 4-digit PIN ----
IRIS CLOSE to Exit
Enter 4-digit PIN ----