ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 63
02/08
Lens Control
The lens iris is automatically controlled by the camera, but can be controlled manually
from the controller.
Iris
Press + (OPEN) or - (CLOSE) on the HJZTP controller to manually alter the camera’s iris.
The camera auto-exposure must be off. Press auto above the iris control keys to put the
camera in auto-iris mode.
The camera lens auto exposure mode can be enabled or disabled using the controller.
Preset 92 toggles the unit between auto and manual exposure. A message AUTO
EXPOSURE ON or AUTO EXPOSURE OFF displays on the video when the ACUIX executes
Preset 92.
Focus
Press + (FAR) or - (NEAR) on the HJZTP controller to manually focus the camera.
Note Auto focus control can be set through the ACUIX setup menus (see Auto
Focus, page 100), to come on when the camera is panned, tilted, or zoomed.
Freeze/Unfreeze Video—Preset 95
The freeze/unfreeze video function described in
Freeze and Unfreeze Video on page 35 can be
accomplished using Preset 95. If the video is frozen,
an asterisk (*) appears on the monitor on the same
line as the camera message.
If the camera message is turned off, the asterisk
displays by itself.
* CAM-0001 M
*
To Next Page
Loading...
