Honeywell ACUIX - Menu Tree

88
On-Screen Setup Menus
Menu Tree
ACUIX Dome
1 Language 2 Display Options 3 Control Options 4 Diagnostic Options 5 Camera Options 6 Function Programming 7 Enhanced Settings
Language English Francais Deutsch Italiano Espanol Polski Nederlands
Display Options
Camera ID Sector ID Preset Names Digital Zoom Start-up Screen Camera Name Location Sector Name Location Crosshairs Dome Name Settings
Control Options
PASS Auto Pivot Program Alarms Set Pan and Tilt Options Set Default Function Auto Focus Preset Tour Auto Focus Control Settings
Diagnostic Options
Coordinates Error Table Clear Memory Clear Error Table Display Error Codes Restore Defaults Scan and Dome Reset
Camera Options
1
Zoom and Focus Exposure Control Video Setup NightShot Control Still Preset White Balance Vertical Phase Wide Dynamic Range Interlace Scanning Image Stabilization Motion Detection
Function Programming
PTZ Tour Menu
2
Program a Preset Tour
3
Privacy Zone Options List PS/VS/Sectors Program Sector
3
Program Privacy Zone
3
Delete PS/PT/PTZ/Sectors
3
Enhanced Features
Video Gain/PWM Settings Display Temperature Temp Format Display Pressure Time and Date Settings Display Voltages
1
Camera Options are dependent on the
camera model installed.
2
Standard protocol only.
3
VCL/Pelco P&D protocols only.