ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 131
02/08
Problem: Video Zooms For No Reason
When you are using the VK-S654 (35X True Day/Night with Wide Dynamic Range) camera
and Electronic Image Stabilization (EIS) is enabled, the camera reduces the area of the
CCD that is scanned. This causes the video displayed on the monitor to appear to have
zoomed in. When the dome undergoes a pan or tilt operation, Electronic Image
Stabilization is disabled while the camera moves, and then re-enables after the camera
has stopped moving for a five second period. This is the normal function of the VK-S654
camera with EIS enabled and cannot be changed.
To Next Page
Loading...
