ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 139
02/08
C
Pelco Emulation
Purpose
This appendix describes the operation of ACUIX Mimic Tours when the ACUIX is set for
Pelco protocol and controlled using a Pelco keyboard.
ACUIX Mimic Tour Operation
The Pelco keyboard has the ability to run Pattern Tours 0, 1, and 2. The Pelco keyboard
also has a key labeled Pattern that sends out a command to perform Pattern Tour 0.
The ACUIX Mimic Tours numbered 1, 2, and 3 are mapped to Pelco’s Pattern Tours
numbered 0, 1, and 2, respectively.
When Pattern Tour 0 is run from the Pelco keyboard, the ACUIX displays Tour 0 even
though it is internally mapped to Mimic Tour 1.
Table C-1 ACUIX Mimic Tours Mapped to Pelco Pattern Tours
Pelco Pattern Tour Number ACUIX Mimic Tour Number
01
12
23
To Next Page
Loading...
