64
Operation and Programming with Honeywell VCL Protocol
Flashback Operation—Preset 96
The flashback function described in Flashback Operation on page 35 can be
accomplished using Preset 96.
NightShot Mode—Preset 94
If the ACUIX has a day/night camera with an IR block filter it can be controlled manually
through the setup menus (Preset 90) or directly by sending the ACUIX to Preset 94. A
message, NightShot On or NightShot Off, displays on the video when the ACUIX
executes Preset 94.
Find Home
The operator can only send the ACUIX to its home position by resetting the scan and
camera. See Reset ACUIX on page 62 for more information on finding home.
Presets
When using VCL protocol, there are several Presets reserved for controlling and
programming the ACUIX. Refer to Table 4-2 for a listing of the pre-programmed Presets
and their functions. In VCL protocol mode, the ACUIX supports 128 Presets (0–127).
Presets 71–99 are reserved for special functions.
To Next Page
Loading...
