ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 83
02/08
7
On-Screen Setup Menus
Introduction
The ACUIX features on-screen menus for setting up the control features, camera, and
enabling and programming special features. The on-screen setup menus can be
accessed from a joystick controller and are displayed on the monitor where the ACUIX
video displays.
Special Presets are pre-programmed for accessing the on-screen setup menus when
using Honeywell VCL or 3rd party protocols.
Control/Video Requirements
1. The ACUIX dome being set up must be selected as the control camera on the
controller.
2. The video from the ACUIX dome must be displayed on a monitor.
3. The controller must have manual control (pan and tilt) of the ACUIX dome.
To Next Page
Loading...
