60
Operation and Programming with Honeywell Diamond Protocol
3. Use the joystick or the Camera and Preset keys to select PROGRAM then press Aux
to enter the ACUIX Program Sector Menu.
4. Enter P and press F5 (enter) to select Privacy Zones (use Camera' and Preset to
scroll through the characters and press Aux).
5. Enter the password and press Enter (default is no password, use Camera and
Preset to scroll through the characters and press Aux, use the HJZTP numeric
keypad to enter numbers).
6. Enter Privacy Zone number and press F5 (enter).
7. Enter the Privacy Zone title by pressing Camera and Preset to scroll through the
characters and then pressing Aux to enter each character. Use the HJZTP numeric
keypad to enter numbers. Press F5 (enter) when done.
8. Scroll to the S by pressing Camera and Preset then pressing Aux to enter the S'
9. Use the joystick and the F1 (▲) F2 (▼) F3 (!) F4 (") keys to adjust the position and
size of the Privacy Zone.
10. Press F5 (enter) to save the Privacy Zone.
11. Return to step 6 to program another sector or press Lock to exit the sector program
menu.
Note For more information on using the HJZTP controller with the ACUIX on-screen
menu, see HJZTP Joystick Controller, page 84 and the HJZTP/HJZTP User
Manual (900.0570).
To Next Page
Loading...
