EasyManuals Logo

Honeywell Farenhyt Series User Manual

Honeywell Farenhyt Series
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
115 IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
5. Enter the Template number, then press ENTER
6. Press ENTER on the template name to edit the name.
You can use words to display a descriptive name for a group.
7. Right arrow to the OPG and select YES or NO to select which output groups to include in the template.
9.5 Point
You may need to change characteristics of individual input points (detectors and switches) even after using JumpStart. This section
explains how to change options for: type of input point; latching/non-latching status (switches); and name and zone/group assignment of
a point.
9.5.1 Point Programming For 5815XL Module
To program for points on an 5815XL module, follow these steps:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select 7 for Panel Programming.
3. Press 4 to enter point menu.
4. Press the up or down arrow key to select the desired module. Refer to Section 8.5 Quick Reference Table for available choices.
Then press ENTER.
5. Enter the number of the point you wish to edit, then press ENTER.
6. Select the type of device by pressing the up or down arrow key. Refer to Table 9.4 under the column heading “Type Selection” for a
list of choices.
NOTE: See Appendix B for editing names.

Table of Contents

Other manuals for Honeywell Farenhyt Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Farenhyt Series and is the answer not in the manual?

Honeywell Farenhyt Series Specifications

General IconGeneral
BrandHoneywell
ModelFarenhyt Series
CategoryControl Panel
LanguageEnglish

Related product manuals