133 IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
Section 10: System Operation
Operation of the control panel is simple. Menus guide you step-by-step through operations. This section of the manual is an overview of
the operation menus. Please read this entire section carefully before operating the panel.
10.1 Default User and Installer Codes
Installer Code: Factory-programmed as 123456.
Multi-site Installer Code: Factory-programmed as 654321.
10.2 Annunciator Description
Figure 10.1 shows the annunciator that is part of the control panel board assembly.
Figure 10.1 Control Panel Annunciator
10.2.1 LCD Display
The control panel LCD displays system messages, annunciates alarms, supervisories and troubles; provides status information; and
prompts for input. These messages can be up to 160 characters, displaying over four lines of 40 characters each. Annunciator keys beep
when they are pressed.
NOTE: See Section 6.2.5 for information on how to modify user access code profiles
To Next Page
Loading...
