179 IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
Section 14: Installation Records
This section of the manual is for you to use if you wish to track how points, zones, and groups have been programmed.
14.1 Detector and Module Point Record
If installing IDP or SK SLC devices, use Table 14.1 to record detector points (up to 159 per SLC loop) installed on the on-board SLC
loop and make a copy of Table 14.2 to record installed modules (up to 159 per SLC loop).
Module Addr
Zone /
Group
Description Module Addr Zone/ Group Description
On-board 1 On-board 30
On-board 2 On-board 31
On-board 3 On-board 32
On-board 4 On-board 33
On-board 5 On-board 34
On-board 6 On-board 35
On-board 7 On-board 36
On-board 8 On-board 37
On-board 9 On-board 38
On-board 10 On-board 39
On-board 11 On-board 40
On-board 12 On-board 41
On-board 13 On-board 42
On-board 14 On-board 43
On-board 15 On-board 44
On-board 16 On-board 45
On-board 17 On-board 46
On-board 18 On-board 47
On-board 19 On-board 48
On-board 20 On-board 49
On-board 21 On-board 50
On-board 22 On-board 51
On-board 23 On-board 52
On-board 24 On-board 53
On-board 25 On-board 54
On-board 26 On-board 55
On-board 27 On-board 56
On-board 28 On-board 57
On-board 29 On-board 58
On-board 59 On-board 103
On-board 60 On-board 104
On-board 61 On-board 105
On-board 62 On-board 106
On-board 63 On-board 107
On-board 64 On-board 108
On-board 65 On-board 109
On-board 66 On-board 110
On-board 67 On-board 111
On-board 68 On-board 112
On-board 69 On-board 113
On-board 70 On-board 114
On-board 71 On-board 115
On-board 72 On-board 116
On-board 73 On-board 117
Table 14.1 : Installation Record of Onboard Devices
To Next Page
Loading...
