Honeywell Farenhyt Series - 10.4.5 Conduct an Indicator Test; 10.4.6 Conduct a Walk Test; 10.4.7 Conduct a Communicator Test; 10.4.8 Manual AlarmNet Registration

IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017 132
3. Select 1 for VCM Maintenance.
9.9.2 Voice Settings
1. Select 7 for Panel Programming.
2. Select 8 for Voice Options.
3. Select 2 for Voice Settings.
Enable Dual Channel System
This option allows you to select whether dual channel is enabled in the system. For dual channel capabilities the system must only con-
tain dual channel voice hardware.
1. Press the up or down arrow key to select YES or NO for enabling the system as dual channel. Then press ENTER.