IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017 124
5880 (input 41-48) SWITCH
MANUAL PULL
Refer to comments column of
“Programming Options for
5815XL Modules” on page 116 for
description of these options.
Latch or Non-latching feature only
appears for WATERFLOW, FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2,
SYSTEM AUX1, SYSTEM AUX2,
ECS INPUT, ECS TAMPER, and
ECS SUPERVISORY.
WATERFLOW
FIRE SUPERVISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1
ZONE AUX2
SYSTEM AUX1
SYSTEM AUX2
MANUAL RELEASE
INTERLOCK
STATUS POINT
5880 (input 41-48) SWITCH
ECS INPUT User also has ECS Event Number
1-8 option for ECS INPUT, ECS
TAMPER, and ECS
SUPERVISORY functions in both
5880 and ECS-VCM or ECS-
NVCM /ECS-RVM choices.
Only available when an ECS-
VCM or ECS-NVCM is installed in
the system to the ECS-VCM or
ECS-NVCM / ECS-RVM choice
part.
ECS TAMPER
ECS SUPERVISORY
5496
UNUSED
B NOTIF
NOTIF OUTPUT
supervised
not supervised
CONTROL CIRCUIT
A NOTIF
NOTIF OUTPUT
CONTROL CIRCUIT
AUX_PWR
CONSTANT
AUX RESET
AUX DOOR
AUX SYNC Can not be supervised
5865
UNUSED
NOTIF
NOTIF OUTPUT
CONTROL CIRCUIT
ECS-AMP
UNUSED
NOTIF
Choices Type Selections
Function Selections for
each Type
Comments
Table 9.7 Point Programming Options for ECS-VCM, ECS-NVCM and ECS-RVM
To Next Page
Loading...
