3 IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
Other Modules
RA-1000 and RA-1000R
Remote LCD Annunciator
4 x 20 Remote LCD annunciator, can be used in any combination, up to a total
of 16 devices on one panel.
5860TG and 5860TR
Trim Ring Kit
Trim ring kits for surface mounting the RA-1000 annunciator. 5860TG is gray;
5860TR is red.
5865-3 and 5865-4 LED
Annunciator
LED annunciator can display up to 30 LEDs
(15 red and 15 yellow). 5865-4 has key
switches for silence and reset, and a system
trouble LED.
5865-3, 5865-4, and 5880 can
be used in any combination, up
to a total of eight devices on
one panel.
5880 (Rev C or above)
LED I/O Module
Driver for up to 40 LEDs. Interfaces with
customized annunciator boards. In addition
the 5880 has eight generic switch input
points.
5883 General Purpose
Relay Module
Provides 10 Form C relays. Designed to be driven by the 5880. Up to four,
5883s can be used with each 5880 module.
ECS-VCM Voice Control Module
Refer to the ECS-Series
Installation Manual P/N 151455
for more information on these
accessories.
ECS-NVCM Network Voice Control Module
ECS-SW24 24 switch expander
ECS-50W 50 watt audio amplifier
ECS-125W 125 watt audio amplifier
ECS-CE4 Provides 4 additional audio circuits for the
ECS-50W or ECS-125W.
ECS-RVM Remote Voice Module
ECS-DUAL50W Dual Channel amplifier
ECS-50WBU Backup daughter card
ECS-INT50W 50 wall internal amplifier
ECS-LOC Local Operating Console Refer to LS10187-001SK-E
SK-NIC Network Interface Card Refer to LS10172-001SK-E
Wireless
WIDP-WGI Wireless Gateway
Refer to the SWIFT wireless
Installation Manual P/N
LS10036-FH-E for more
information on these
accessories.
WIDP-PHOTO Wireless Photoelectric Smoke Detector with
4" base
WIDP-ACCLIMATE
Wireless Multi criteria photoelectric smoke
detector with thermal (135°F) with 4" base
WIDP-HEAT-ROR
Wireless Heat Rate of Rise Detector 135°
fixed with 4” base
WIDP-HEAT
Wireless Heat, 135° fixed Heat Detector with
4” base
WIDP-MONITOR Wireless Addressable Monitor module
WIDP-RELAY Wireless Addressable Relay module
B210W 6" wireless base
WSK-WGI Wireless Gateway
Refer to the SWIFT wireless
Installation Manual P/N
LS10036-SK-E for more
information on these
accessories.
WSK-PHOTO Wireless photo with 4" base
WSK-PHOTO-T Wireless Multi criteria photoelectric smoke
detector with thermal (135°F) with 4" base
WSK-HEAT-ROR Wireless heat, ROR/ 135° fixed with 4" base
WSK-HEAT Wireless Heat, 135° fixed with 4" base
WSK-MONITOR Wireless monitor module
WSK-RELAY Wireless relay module
B210W 6" wireless base
Misc.
HFSS Honeywell Fire
Software Suite
For communication and panel programming with a Windows-based computer.
Enables remote viewing of detector status and event history.
7860 Telephone Cord RJ31X cord for connecting phone line to the IFP-300.
RBB Remote Battery Box for mounting backup batteries that are too large to fit into
the main control panel cabinet. Dimensions: 16" W x 10" H x 6" D (40.64 cm W
x 25.4 cm H x 15.24 cm D).
CELL-MOD Cellular board with Plastic Enclosure Refer to
LS10182-001SK-ECELL-CAB-SK Cellular board with Metal Enclosure, lock &
key
Type of Device Model Description
Table 1.1 IFP-300 Compatible Products
To Next Page
Loading...
Need help?
General
