To Next Page

To Previous Page

5-22

General System Configuration

Configuring Ethernet Settings

6. If a management station exists on another network segment, enter the IP

address of a gateway that can route traffic between these segments. This

is a required field.

7. To set dynamic DNS nameservers, click the Dynamic button. To set the

nameservers manually, click Manual.

8. If you chose to manually enter the DNS nameservers, enter the IP address

for the primary and secondary DNS servers to be used for host-name to

IP address resolution.

9. Select [Update] to save these IP settings.

Other manuals for HP 530

Questions and Answers:

Need help?

Do you have a question about the HP 530 and is the answer not in the manual?

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g