HP 530 User Manual

5-41
General System Configuration
Configuring SNMPv3
Figure 5-9. The SNMP SNMPv3 Users Tab
To Add an SNMPv3 User:
1. Click Management > SNMP and select the SNMPv3 Users tab.
2. Enter the new username in the Username field.
3. Optionally, select an authentication method from the Authentication Type
drop-down.
4. If you have selected an authentication method for the user, you must enter
a valid password in the Password field.
5. Optionally, select a privacy method from the Privacy Type drop-down.
Adding a privacy method for the user requires that you also select an
authentication method.
6. If you have selected a privacy method for the user, you must enter a valid
password in the Password field.
7. Click [Update].
To Edit an existing SNMPv3 User’s settings:
1. Click Management > SNMP and select the SNMPv3 Users tab.

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g