HP 530 User Manual

7-71
Wireless Security Configuration
Web Authentication for Mobile Users
Enabling Web-Auth on the access point. The following example enables
Web-Authentication on WLAN 1, with Guest access and Registered User
access enabled.
ProCurve Access Point 530(radio1-wlan1)# web-auth guest-login
ProCurve Access Point 530(radio1-wlan1)# web-auth username-login
ProCurve Access Point 530(radio1-wlan1)# web-auth retry-limit 3
ProCurve Access Point 530(radio1-wlan1)# web-auth redirect-url www.procurve.com
ProCurve Access Point 530(radio1-wlan1)# show wlan 1
WLAN #1 on Radio 1
Description Radio 1 - WLAN 1
Status Enabled SSID PR3_WLAN
VLAN 1 - Untagged BSSID 00:14:C2:A7:11:A0
DTIM Period 2
Security Type wpa-psk (WPA-PSK) Closed System Disabled
MAC Auth Mode local accept-list only MAC Auth List ACL 1
Authentication open-system only WEP Key Type hex
WEP Key 1 not set WEP Key Size 128bit
WEP Key 2 not set Default Key WEP Key 1
WEP Key 3 not set
WEP Key 4 not set
WPA or WPA2 WPA and WPA2 WPA Cipher TKIP only
WPA Pre-auth. Disabled
WPA Shared Key abcdefghijklmnop
Web Authentication
Status Enabled Retry Limit 3
Username/Password Login Enabled Guest Login Enabled
Redirect URL www.procurve.com
Default Login Page Enabled
Default Login Failed Page Enabled
Default Welcome Page Enabled
RADIUS
...

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g