To Next Page

To Previous Page

8-32

Special Features

AP Detection Commands

Figure 8-11. AP Detection - Settings Tab

To Enable AP Detection Parameters:

1. Select Special Features > AP Detection > Settings tab.

2. To enable scanning, select Enable from the AP Detection drop-down for

the radio you are configuring.

3. To specify the beacon transmission interval, enter the interval value in the

Scan Interval field.

4. To specify the duration of scanning, enter the duration value in the Scan

Duration field.

5. Select [Update] to save the settings.

Other manuals for HP 530

Questions and Answers:

Need help?

Do you have a question about the HP 530 and is the answer not in the manual?

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g