HP LaserJet M72625dn Series

Table 7-6 Security
Option Description
Image Overwrite
a
You can set the printer to overwrite data stored in the memory. The printer overwrites the data with
dierent patterns eliminating the possibilities of recovery.
● Automatic Image Overwrite: When a job is completed, there are temporal images left in the memory.
For security reasons, you can set the printer to automatically overwrite secure nonvolatile memory. If
you want to secure memory space, you can set the printer to automatically overwrite secure non-
volatile memory.
● Manual Image Overwrite: When printing, copying, scanning, and faxing, the printer temporarily uses
memory space. For security reasons, you can set the printer to manually overwrite secure non-
volatile memory. If you want to secure memory space, you can manually overwrite secure non-
volatile memory. You can set the printer to repeat the manual image overwrite after the system is
rebooted.
Authentication ● Mode
– Device Mode: Activate device authentication. Device authentication requests a user to login
before being able to use the device. Users cannot use any application without logging in.
– Application Mode: Activate application authentication. An administrator can choose the
application(s) to require a user to login to use. Users cannot use the selected application(s)
without logging-in. Press Application mode to enable authentication.
– Basic Mode: Activate basic authentication. Users are asked to login when they select options
that are only available to administrators.
● Method
– Local Authentication: Executes the authentication process based on the user information stored
on the mass storage device (hard disk) in the device.
– Standard Accounting Only: Allows users to log in by entering ID and password.
– Kerberos and Local Authentication: Executes the authentication process based on the user
information stored on the kerberos server.
– LDAP and Local Authentication: Executes the authentication process based on the user
information stored on the LDAP server.
– SMB and Local Authentication: Executes the authentication process based on the user
information stored on the SMB server.
NOTE: LUI Login Screen: Provides Pre-Installed-For- LUI, by default.
NOTE: Options: Select what to require for the user to login:
– Auto Logout: You can use auto logout.
– Seconds: You can set the auto logout time.
– Login Identication: You can select the login Identication type.
– Login Restriction: You can set the Login Restriction time, attempt, or lock-out time.
– Logout Policy: You can set the logout policy.
IPSec Select O to disable IPSec.
HTTPS Select O to disable HTTPS.
104 Chapter 7 Menu Overview and Advanced Features ENWW