4. Squeeze Tray 1 (MP) paper width guides and adjust them to the width of the paper. Do not force too much,
otherwise the paper will bend resulting in a paper jam or skew.
5
. When you print a document, set the paper type and size for the Tray 1 (MP) (see "Media sizes automatically
detected").
For information about setting the paper type and size on the control panel (see "Tray Settings").
Media sizes automatically detected
This printer can automatically detect various sized-paper. Refer to the table below.
The paper sizes auto-detected are determined by the printer's default paper size. If A4, metric paper sizes are
auto detected, if Letter, imperial sizes are auto detected.
Table 3-8 Media sizes automatically detected
Size
a
(Plain)
Standard tray 2, 3 Optional dual cassette feeder Duplex printing
Letter SEF
b
Letter LEF
c
11x17
NOTE: (Tray 3 only)
Legal SEF Auto-detected in trays 2 -4
Executive SEF
Executive LEF
Statement SEF
A3 SEF
NOTE: (Tray 3 only)
A4 SEF
52 Chapter 3 Media and tray ENWW
To Next Page
Loading...