Network environment
You can use network after connecting network cable to a corresponding port on your printer.
You need to set up the network protocols on the printer to use it as your network printer. You can set up the basic
network settings through the printer's control panel.
The following table shows the network environments supported by the printer:
Table 2-1 Network environment
Items Specications
Network interface ● Ethernet 10/100/1000 Base-TX Wired Lan
● 802.11b/g/n Wireless LAN
a
Network operating system ● Windows® XP Service Pack 3, Windows Server® 2003,
● Windows Vista®, Windows® 7/8, Windows® 8.1, Windows® 10, Windows Server® 2008 R2, Windows®
Server 2012, Windows® Server 2016
● Various Linux OS
● macOS 10.6 -10.13
● 32-bit and 64-bit operating systems
Network protocols ● TCP/IPv4
● DHCP, BOOTP
● DNS, WINS, Bonjour, SLP, UPnP
● Standard TCP/IP Printing (RAW), LPR, IPP, WSD
● SNMPv 1/2/3, HTTP, IPSec
● TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec)
Wireless security
a
● Authentication: Open System, Shared Key, WPA/WPA2-Personal/Enterprise
● Encryption: WEP64, WEP128, TKIP, AES
a
Optional device
24 Chapter 2 Using a Network-Connected Printer ENWW
To Next Page
Loading...