Jam in Tray 1 (MP)
Jam inside the printer
The fuser area is hot. Turn the printer o and let the printer cool before removing paper from the Fuser Unit
area. Failure to take care when removing paper from this area may cause injury.
NOTE: Illustrations on this user’s guide may dier from your printer depending on its options or models. Check
your printer type (see "Printer overview").
Jam feed 1, Jam feed 2
Jam feed 3, Jam feed 4 (Optional device only)
Jam in the fuser area
The fuser area is hot. Take care when removing paper from the printer.
ENWW Clearing paper jams 127
To Next Page
Loading...