WebUI (embedded web server)
This section gives you step-by-step instructions for setting up the network environment using WebUI.
NOTE:
● Internet Explorer® 8.0 or higher is the minimum requirement for WebUI.
● Some menus may not appear on the display screen depending on the settings or models. If so, it is not
applicable to your printer.
What is WebUI?
If you have connected your printer to a network and set up TCP/IP network parameters correctly, you can
manage the printer via WebUI. Use WebUI to:
● View the printer’s device information and check its current status.
● Change TCP/IP parameters and set up other network parameters.
● Change the printer preference.
● Set the email notications advising of the printer’s status.
● Get support for using the printer.
● Upgrade printer software.
Required web browser
You need one of the following web browsers to use WebUI:
● Internet Explorer® 8.0 or higher
● Chrome 27.0 or higher
● FireFox 21.0 or higher
● Safari 5.9.1 or higher
Connecting to WebUI
IPv4 supported web browser
1. Start a web browser that supports IPv4 addressing as a URL.
NOTE: You can get the printer’s IP address from the printer report (see" Other settings").
2. Your printer’s WebUI website opens.
30 Chapter 2 Using a Network-Connected Printer ENWW
To Next Page
Loading...