Tips for moving the printer
CAUTION: Use safe lifting and handling techniques. If you need to move this printer, you need at least four
people. Use the lifting handles, as shown below. If less than four people attempt to lift the printer, it can lead to
back injury.
● When moving the printer, do not subject the control panel to hard impacts as this may damage the screen
or border of the control panel.
● The warranty does not cover damage from falls or impacts due to the intentional or unintentional actions
of the user.
● Do not tilt or turn it upside down. Otherwise, the inside of the printer may be contaminated by toner, which
can cause damage to the printer or bad print quality.
● Make sure at least four people are holding the printer securely.
● Lock the scanner lock.
● Moving long distances using a truck:
– Remove the nisher, optional trays, or desk and inner imaging unit and toner cartridges.
– Fasten the scanner locking screw and the nisher locking screws.
– All trays must be closed while relocating or moving product.
– Tape trays and document feeder cover.
● Moving short distances (e.g. moving between oors) to prevent damage from vibration:
– Remove the nisher.
ENWW Tips for moving the printer 121
To Next Page
Loading...