HP LaserJet M72625dn Series

3. Set the scan features in the Advanced, Image, or Output tabs.
4. Press the Basic tab.
5. Press To’s input area and Recent.
6. Press the email address which you want to re-send. Then press OK.
NOTE:
● Add to Address: Allows you to add an email address in the Recent results to the Address Book.
● Delete: Allows you to delete an email address in the Recent results. Press the email address you want
to delete. Then press Delete.
7. Set the scan quality by Duplex and Resolution.
8. Press the (Start) button to scan and send the le.
If an original is placed on the scanner glass, the printer shows the window asking if you want to place
another page. Load another original and press Yes. When you nish, press No on this window.
Printing an email conrmation report
You can set the printer to print a report whether an email transmission is successfully completed or not.
NOTE: If a report contains characters or fonts that the printer does not support, Unknown could be printed
instead of the characters/fonts in the report.
1. Press Machine Setup > Application Settings > Scan to Email Settings from the display screen.
2. Press the appropriate option in Print Conrmation Report.
● Always: Always prints a conrmation report whether an email transmission is successfully completed
or not.
● Never: Never prints a conrmation report.
● On Errors Only: Prints a conrmation report only when an email transmission is not successful.
3. Press (Back) to go back to the previous screen.
84 Chapter 6 Scanning ENWW