Printing on special media
NOTE: The media types are shown in the Printing Preferences. This paper type option allows you to set the
type of paper to be loaded in the tray. This setting appears in the list so that you can select it. This will let you get
the best quality printout. If not, the desired print quality may not be achieved.
●
Envelope
●
Labels
●
Card stock/ Custom-sized paper
●
Letterhead/Pre-printed paper
●
Additional information for printing on special media
Envelope
Successful printing on envelopes depends upon the quality of the envelopes.
To print an envelope, place it with the ap side up.
● When selecting envelopes, consider the following factors:
– Weight: The weight of the envelope paper should not exceed 90 g/m2 (16 lb.) otherwise, a jam may
occur.
– Construction: Prior to printing, envelopes should lie at with less than 6 mm (0.25 inches) curl, and
should not contain air.
– Condition: Envelopes should not be wrinkled, nicked, or damaged.
– Temperature: Use envelopes that are compatible with the heat and pressure of the printer during
operation.
● Use only well-constructed envelopes with sharp and well-creased folds.
● Do not use stamped envelopes.
54 Chapter 3 Media and tray ENWW
To Next Page
Loading...