HP LaserJet M72625dn Series

IP Setting
You can choose the method for allocating IP addresses.
● Static: Select to enter IP address/Subnet Mask/Gateway Address manually.
● BOOTP: IP address/Subnet Mask/Gateway Address are automatically allocated by the BOOTP Server.
● DHCP: IP address/Subnet Mask/Gateway Address are automatically allocated by the DHCP Server.
DNS Conguration
You can congure the DNS server.
● Host Name: Enter the host name. You can enter up to 63 characters. Default name is “"NPI"{last 6 digits of
MAC address}”.
● Domain Name: Enter the domain name. You can enter up to 128 characters.
● Primary DNS Server: Enter the address of the DNS server you want to use primarily.
● Secondary DNS Server: Enter the address of the DNS server you want to use as an alternative.
● Dynamic DNS Registration: If you want to use, check the checkbox(es) of dynamic DNS registration. If this
option is checked, the printer registers its host name and domain name to congured DNS servers
dynamically. Also, if this option is checked and DHCP is selected, DHCP FQDN options are automatically
disabled.
WINS (Windows Internet Name Service)
You can congure the WINS server. WINS is used in the Windows operating system.
Display IP address
You can set the printer to display the IP address on the Notication Bar. If you select this option, the IP
address will show on the Notication Bar.
26 Chapter 2 Using a Network-Connected Printer ENWW