Tips on using Tray 1 (MP)
● Load only one type, size, and weight of print media at a time in the Tray 1 (MP).
● To prevent paper jams, do not add paper while printing when there is still paper in Tray 1 (MP). This also
applies to other types of print media.
● Print media should be loaded face down with the top edge going into Tray 1 (MP) rst and be placed in the
center of the tray.
● Always load only the specied print media to avoid paper jams and print quality problems (see "Print media
specications").
● Flatten any curl on postcards, envelopes, and labels before loading them into Tray 1 (MP).
1. Open Tray 1 (MP) and pull out the extension if necessary.
2. Flex or fan the edge of the paper stack to separate the pages before loading originals.
50 Chapter 3 Media and tray ENWW
To Next Page
Loading...