2. Place the originals face up in the document feeder or place a single original face down on the scanner glass
and close the document feeder.
NOTE: Ensure all documents are centered in the input tray. Adjust paper guides to align with the edges of
the paper.
3. Adjust the settings for each copy such as Reduce/Enlarge, Duplex/NUp, Output, Paper Source, etc.
NOTE: You can set the default Quick Copy options from Machine Setup > Application Settings > Copy
Settings from the display screen. Set the most frequently used settings.
4. Enter the number of copies using the numeric keypad on the control panel, if necessary.
5. Press (Start) from the control panel to begin copying.
ENWW Quick copying 71
To Next Page
Loading...