282 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
System AC Power Overload (Power Supply X)
Event Type: Power supply overload
Action:
1. Switch the voltage from 110 V to 220 V or add an additional power supply
(if applicable to the system).
2. If the problem persists, remove some of the installed options.
System AC Power Problem (Power Supply X)
System Overheating (Zone X, Location)
Event Type: AC voltage problem
Action: Check for any power source problems.
System Fan Failure (Fan X, Location)
Event Type: Fan failure
Action: Replace the fan.
System Fans Not Redundant
Event Type: Fans not redundant
Action: Add a fan or replace the failed fan.
Event Type: Overheating condition
Action: Check fans.
System Power Supplies Not Redundant
Event Type: Power supply not redundant
Action: Add a power supply or replace the failed power supply.
To Next Page
Loading...
