HP ProLiant ML370 Generation 4 User Manual

Server setup 51
•
•
SmartStart assisted installation—Insert the SmartStart CD into the CD-ROM
drive and reboot the server.
Manual installation—Insert the operating system CD into the CD-ROM drive
and reboot the server. This process may require you to obtain additional
drivers from the HP website (http://www.hp.com/support
).
Follow the on-screen instructions to begin the installation process.
For information on using these installation paths, refer to the SmartStart
installation poster in the HP ProLiant Essentials Foundation Pack, included with
the server.
Registering the server
To register a server, refer to the registration card in the HP ProLiant Essentials
Foundation Pack or the HP Registration website (http://register.hp.com
).

HP ProLiant ML370 Generation 4 Specifications

General

Processor	Intel Xeon
Processor Socket	Socket 604
Chipset	Intel E7520
Memory Slots	8 DIMM slots
RAID Support	RAID 0, 1, 5
Form Factor	Tower
Storage	SATA
Expansion Slots	6 PCI-X slots
Power Supply	Redundant power supply optional
Operating System Support	Linux
Drive Bays	Up to 8 hot-plug drive bays