40 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
•
•
Operating system or application software
PDU
Installing hardware options
Install any hardware options before initializing the server. For options installation
information, refer to the option documentation. For server-specific information,
refer to "Hardware options installation (on page 53
)."
Setting up a tower server
Follow the steps in this section to set up a tower model server. If you are going to
install the server into a rack, refer to the rack installation ("Installing the server
into the rack" on page 42
) section.
1. Connect peripheral devices to the server.
WARNING: To reduce the risk of electric shock, fire, or
damage to the equipment, do not plug telephone or
telecommunications connectors into RJ-45 connectors.
To Next Page
Loading...
