Hardware options installation 77
1. Power down the server ("Powering down the server" on page 27).
2. Extend or remove the server from the rack ("Extending the server from the
rack" on page 28
).
3. Remove the front bezel door, if necessary.
4. Remove the access panel ("Removing the access panel" on page 30
).
5. Remove the redundant fan cage retaining bracket from the chassis.
IMPORTANT: Do not discard the fan cage retaining bracket. The
bracket is required for proper fan operation.
6. Slide the redundant fan cage into the slots on the chassis wall.
To Next Page
Loading...
