To Next Page

To Previous Page

Hardware options installation 79

NOTE: Any hot-plug fan provided in the redundant hot-plug fan cage

option kit can be installed in any of the hot-plug fan slots. Fans are

keyed to fit only one way in the slot.

2. Install other hardware options as needed.

3. Power up the server and observe the internal system health LED on the front

panel and the LEDs on all installed fans to be sure they are green.

NOTE: If the front panel internal system health LED is not green after

you install hot-plug fans, reseat the hot-plug fan or refer to the

troubleshooting section.

Questions and Answers:

Need help?

Do you have a question about the HP ProLiant ML370 Generation 4 and is the answer not in the manual?

HP ProLiant ML370 Generation 4 Specifications

General

Processor	Intel Xeon
Processor Socket	Socket 604
Chipset	Intel E7520
Memory Slots	8 DIMM slots
RAID Support	RAID 0, 1, 5
Form Factor	Tower
Storage	SATA
Expansion Slots	6 PCI-X slots
Power Supply	Redundant power supply optional
Operating System Support	Linux
Drive Bays	Up to 8 hot-plug drive bays