HP rp7440 - Core I;O Buttons; Core I;O Card Bulkhead Leds

Figure 5-7 Core I/O Card Bulkhead LEDs
Power
Attention
Locate
Reset
Active
MP Pwr
MP LAN
10 - off
100 - on
ACT/Link
Table 5-6 Core I/O LEDs
DescriptionStateLED (as silk-screened on the
bulkhead)
I/O power onOn GreenPower
PCI attentionOn YellowAttention
MP LAN in 10 BT modeOn GreenMP LAN 10 BT
MP LAN in 100 BT modeOn GreenMP LAN 100 BT
MP LAN activityOn GreenACT/Link
Locater LEDOn BlueLocate
Indicates that the MP is being resetOn AmberReset
This core I/O is managing the systemOn GreenActive
Indicates standby power is onOn GreenMP Power
Core I/O Buttons
There are two recessed buttons on the back of the core I/O card, as explained in Table 5-7.
Server LED Indicators 129