HP rp7440 User Manual

CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to
follow ESD safety precautions could result in damage to the server.
Figure 6-34 BPS Location
Bulk Power
Supplies
IMPORTANT: When a BPS is pulled from the server and then immediately re-inserted, the
server might report an overcurrent condition and shut down.
Removing a BPS
1. Remove the front bezel.
2. Press in on the extraction lever release mechanism and pull outward.
172 Removing and Replacing Components

HP rp7440 Specifications

General

Brand	HP
Model	rp7440
Category	Server
Language	English