95
Examples
# Configure queue 0 as a WFQ queue, and set the minimum guaranteed bandwidth to 100 kbps for
queue 0.
<Sysname> system-view
[Sysname] qos qmprofile myprofile
[Sysname-qmprofile-myprofile] queue 0 wfq group 1 weight 1
[Sysname-qmprofile-myprofile] bandwidth queue 0 min 100
display qos qmprofile configuration
Use display qos qmprofile configuration to display the queue scheduling profile configuration.
Syntax
display qos qmprofile configuration [ profile-name ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
profile-name: Specifies a queue scheduling profile by its name, a case-sensitive string of 1 to 31
characters. If you do not specify a queue scheduling profile, this command displays the configuration
of all queue scheduling profiles.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays the queue scheduling profile configuration for the master device.
Examples
# Display the configuration of queue scheduling profile myprofile.
<Sysname> display qos qmprofile configuration myprofile
Queue management profile: myprofile (ID 1)
Queue ID Type Group Schedule Schedule Min Max
unit value bandwidth bandwidth
---------------------------------------------------------------------
be WRR 1 weight 1 N/A N/A
af1 WRR 1 weight 2 N/A N/A
af2 WRR 1 weight 3 N/A N/A
af3 WRR 1 weight 4 N/A N/A
af4 WRR 1 weight 5 N/A N/A
ef WRR 1 weight 9 N/A N/A
cs6 WRR 1 weight 13 N/A N/A
cs7 WRR 1 weight 15 N/A N/A
Table 37 Command output
Field Description
Queue management profile Queue scheduling profile name.
Type
Queue scheduling type:
• SP.
To Next Page
Loading...
