14
Field Description
action deny for packet filtering. The action permit still
functions.
• Permit—The default action permit has been successfully
applied for packet filtering.
IPv6 default action
Packet filter default action for packets that do not match any
IPv6 ACLs:
• Deny—The default action deny has been successfully
applied for packet filtering.
• Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
• Permit—The default action permit has been successfully
applied for packet filtering.
MAC default action
Packet filter default action for packets that do not match any
Layer 2 ACLs:
• Deny—The default action deny has been successfully
applied for packet filtering.
• Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
• Permit—The default action permit has been successfully
applied for packet filtering.
display qos-acl resource
Use display qos-acl resource to display QoS and ACL resource usage.
Syntax
display qos-acl resource [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays QoS and ACL resource usage for all member devices.
Examples
# Display QoS and ACL resource usage.
<Sysname> display qos-acl resource
Interfaces: FGE9/0/1 to FGE9/0/19, XGE9/0/20:1 to XGE9/0/20:4
XGE9/0/21:1 to XGE9/0/21:4, XGE9/0/22:1 to XGE9/0/22:4
XGE9/0/23:1 to XGE9/0/23:4, XGE9/0/24:1 to XGE9/0/24:4
XGE9/0/25:1 to XGE9/0/25:4, XGE9/0/26:1 to XGE9/0/26:4
XGE9/0/27:1 to XGE9/0/27:4, XGE9/0/28:1 to XGE9/0/28:4
FGE9/0/29 to FGE9/0/32 (slot 9)
---------------------------------------------------------------------
Type Total Reserved Configured Remaining Usage
To Next Page
Loading...
