HPE FlexFabric 5940 SERIES

41
# Define a match criterion for traffic class class1 to match the packets with a local QoS ID of 3.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match qos-local-id 3
# Define a match criterion for traffic class class1 to match ARP protocol packets.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match control-plane protocol arp
# Define a match criterion for traffic class class1 to match packets of the protocols in protocol group
normal.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match control-plane protocol-group normal
# Define a match criterion for traffic class class1 to match the VXLAN packets with tunnel ID 2.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match tunnel-id 2
# Define a match criterion for traffic class class1 to match the packets with VXLAN 10.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match vxlan 10
traffic classifier
Use traffic classifier to create a traffic class and enter its view, or enter the view of an existing traffic
class.
Use undo traffic classifier to delete a traffic class.
Syntax
traffic classifier classifier-name [ operator { and | or } ]
undo traffic classifier classifier-name
Default
No traffic classes exist.
Views
System view
Predefined user roles
network-admin
Parameters
classifier-name: Specifies a name for the traffic class, a case-sensitive string of 1 to 31 characters.
operator: Sets the operator to logic AND (the default) or OR for the traffic class.
and: Specifies the logic AND operator. The traffic class matches the packets that match all its
criteria.
or: Specifies the logic OR operator. The traffic class matches the packets that match any of its
criteria.