HPE FlexFabric 5940 SERIES

96
Field Description
•
WRR.
• WFQ.
Group
Priority group to which the queue belongs.
The default value is 1.
Schedule unit
Scheduling unit:
weight
or
byte-count
.
N/A
indicates that this field is ignored.
Schedule value
This field indicates:
• Weight value for the weight scheduling unit.
• Number of bytes for the byte-count scheduling unit.
Min bandwidth Minimum guaranteed bandwidth for the queue.
Max bandwidth Maximum allowed bandwidth for the queue.
display qos qmprofile interface
Use display qos qmprofile interface to display the queue scheduling profile applied to an interface.
Syntax
display qos qmprofile interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the queue scheduling profiles applied to all interfaces.
Examples
# Display the queue scheduling profile applied to Ten-GigabitEthernet 1/0/1.
<Sysname> display qos qmprofile interface ten-gigabitethernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Queue management profile: myprofile
Table 38 Command output
Field Description
Queue management profile Name of the queue scheduling profile applied to the interface.
qos apply qmprofile
Use qos apply qmprofile to apply a queue scheduling profile to an interface.
Use undo qos apply qmprofile to restore the default.
Syntax
qos apply qmprofile profile-name