66
Remark dscp 3
Classifier: 3
Operator: AND
Rule(s) :
-none-
Behavior: 3
-none-
Table 25 Command output
Field Description
Direction Direction in which the QoS policy is applied for the VLAN.
Green packets Statistics about green packets.
Yellow packets Statistics about yellow packets.
Red packets Statistics about red packets.
For the description of other fields, see Table 15 and Table 18.
qos apply policy (interface view, control plane view)
Use qos apply policy to apply a QoS policy to an interface or control plane.
Use undo qos apply policy to remove an applied QoS policy.
Syntax
qos apply policy policy-name { inbound | outbound }
undo qos apply policy policy-name { inbound | outbound }
Default
No QoS policy is applied.
Views
Control plane view
Layer 2 Ethernet interface view
Layer 3 Ethernet interface view
Layer 2 aggregate interface view
Layer 3 aggregate interface view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters.
inbound: Applies the QoS policy to incoming traffic.
outbound: Applies the QoS policy to outgoing traffic. This keyword is not supported in control plane
view.
Usage guidelines
If a class uses control plane protocols or control plane protocol groups as match criteria, the action in
the associated traffic behavior can only be car or the combination of car and accounting packet.
Only the cir keyword in the car action can be applied correctly.
To Next Page
Loading...
Need help?
General