126
<Sysname> system-view
[Sysname] qcn priority 2 profile 2
qcn profile
Use qcn profile to create a profile.
Use undo qcn profile to delete a profile.
Syntax
qcn profile profile-id set-point length-value weight weight-value
undo qcn profile profile-id
Default
No user-created profiles exist.
Views
System view
Predefined user roles
network-admin
Parameters
profile-id: Specifies the ID of the profile to be created. The value range for this argument is 1 to 128.
The system automatically creates the default profile (profile 0), which cannot be modified.
set-point length-value: Specifies the desired queue length in bytes. The value range for length-value
is 16644 to 8320000.
weight weight-value: Specifies a weigh value. The value range for weight-value is 2 to 5.
Examples
# Create profile 1, with a desired queue length of 28000 bytes and a weight value of 1.
<Sysname> system-view
[Sysname] qcn profile 1 set-point 28000 weight 1
reset qcn cp interface
Use reset qcn cp interface to clear CP statistics.
Syntax
reset qcn cp interface [ interface-type interface-number ] [ priority priority ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies a Layer 2 Ethernet interface by its type and number. If you
do not specify an interface, this command clears CP statistics for all Layer 2 Ethernet interfaces.
priority priority: Specifies a CND by a priority value (CNPV). If you do not specify a CND, this
command clears CP statistics for all CNDs.
To Next Page
Loading...
