HPE FlexFabric 5940 SERIES

68
undo qos apply policy policy-name global { inbound | outbound }
Default
No QoS policy is applied globally.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters.
inbound: Applies the QoS policy to the incoming packets on all interfaces.
outbound: Applies the QoS policy to the outgoing packets on all interfaces.
Usage guidelines
A global QoS policy takes effect on all incoming or outgoing traffic depending on the direction in
which the QoS policy is applied.
Examples
# Globally apply QoS policy user1 to the incoming traffic.
<Sysname> system-view
[Sysname] qos apply policy user1 global inbound
qos policy
Use qos policy to create a QoS policy and enter its view, or enter the view of an existing QoS policy.
Use undo qos policy to delete a QoS policy.
Syntax
qos policy policy-name
undo qos policy policy-name
Default
No QoS policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a name for the QoS policy, a case-sensitive string of 1 to 31 characters.
Usage guidelines
To delete a QoS policy that has been applied to an object, you must first remove the QoS policy from
the object.
Examples
# Create a QoS policy named user1.
<Sysname> system-view
[Sysname] qos policy user1