84
7 cs7 1 15
Table 32 Command output
Field Description
Interface Interface name, including the interface type and interface number.
Output queue Type of the current output queue.
Group
Number of the group that holds the queue. By default, all queues are in
group 1.
Byte-count Byte-count scheduling weight of the queue.
SP commands
display qos queue sp interface
Use display qos queue sp interface to display the SP queuing configuration of an interface.
Syntax
display qos queue sp interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the SP queuing configuration of all interfaces.
Examples
# Display the SP queuing configuration of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos queue sp interface ten-gigabitethernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Output queue: Strict Priority queuing
Table 33 Command output
Field Description
Interface Interface type and interface number.
Output queue Type of the current output queue.
qos sp
Use qos sp to enable SP queuing on an interface.
Use undo qos sp to restore the default.
Syntax
qos sp
To Next Page
Loading...
Need help?
General