15
---------------------------------------------------------------------
VFP ACL 1024 261 0 763 25%
IFP ACL 16384 14336 8 2040 87%
IFP Meter 8192 7168 0 1024 87%
IFP Counter 8192 7168 2 1022 87%
EFP ACL 1024 0 3 1021 0%
EFP Meter 512 0 0 512 0%
EFP Counter 512 0 0 512 0%
Table 6 Command output
Field Description
Interfaces
Interface range for the resources.
Type
Resource type:
• ACL—ACL rule resources.
• Meter—Traffic policing resources.
• Counter—Traffic accounting resources.
• VFP—Resources for marking local QoS ID before Layer 2 forwarding.
• IFP—Inbound resources.
• EFP—Outbound resources.
Total
Total number of resources.
Reserved Number of reserved resources.
Configured Number of resources that has been applied.
Remaining Number of resources that you can apply.
Usage
Configured and reserved resources as a percentage of total resources. If
the percentage is not an integer, this field displays the integer part. For
example, if the actual usage is 50.8%, this field displays 50%.
packet-filter
Use packet-filter to apply an ACL to an interface to filter packets.
Use undo packet-filter to remove an ACL from an interface.
Syntax
packet-filter [ ipv6 | mac ] { acl-number | name acl-name } { inbound | outbound }
[ hardware-count ]
undo packet-filter [ ipv6 | mac ] { acl-number | name acl-name } { inbound | outbound }
Default
No ACL is applied to an interface to filter packets.
Views
Layer 2/Layer 3 Ethernet interface view
Layer 2/Layer 3 aggregate interface view
VLAN interface view
Predefined user roles
network-admin
To Next Page
Loading...
