8
IPv4 default action: Deny
Table 2 Command output
Field Description
Interface
Interface to which the ACL applies.
Inbound policy ACL used for filtering incoming traffic.
Outbound policy
ACL used for filtering outgoing traffic.
IPv4 ACL 2001 IPv4 basic ACL 2001 has been successfully applied.
IPv6 ACL 2002 (Failed) The device has failed to apply IPv6 basic ACL 2002.
Hardware-count ACL rule match counting has been successfully enabled.
Hardware-count (Failed) The device has failed to enable counting ACL rule matches.
IPv4 default action
Packet filter default action for packets that do not match any IPv4
ACLs:
• Deny—The default action deny has been successfully
applied for packet filtering.
• Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
• Permit—The default action permit has been successfully
applied for packet filtering.
IPv6 default action
Packet filter default action for packets that do not match any IPv6
ACLs:
• Deny—The default action deny has been successfully
applied for packet filtering.
• Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
• Permit—The default action permit has been successfully
applied for packet filtering.
MAC default action
Packet filter default action for packets that do not match any Layer
2 ACLs:
• Deny—The default action deny has been successfully
applied for packet filtering.
• Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
• Permit—The default action permit has been successfully
applied for packet filtering.
display packet-filter statistics
Use display packet-filter statistics to display packet filtering statistics.
Syntax
display packet-filter statistics interface interface-type interface-number { inbound | outbound }
[ [ ipv6 | mac ] { acl-number | name acl-name } ] [ brief ]
Views
Any view
To Next Page
Loading...
