HPE FlexFabric 5940 SERIES

110
Time range commands
display time-range
Use display time-range to display time range configuration and status.
Syntax
display time-range { time-range-name | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
time-range-name: Specifies a time range name, a case-insensitive string of 1 to 32 characters. It
must start with an English letter.
all: Displays the configuration and status of all existing time ranges.
Examples
# Display the configuration and status of time range t4.
<Sysname> display time-range t4
Current time is 17:12:34 11/23/2010 Tuesday
Time-range : t4 (Inactive)
10:00 to 12:00 Mon
14:00 to 16:00 Wed
from 00:00 1/1/2011 to 00:00 1/1/2012
from 00:00 6/1/2011 to 00:00 7/1/2011
Table 42 Command output
Field Description
Current time Current system time.
Time-range
Configuration and status of the time range, including its name, status (active
or inactive), and start time and end time.
time-range
Use time-range to create or edit a time range.
Use undo time-range to delete a time range or a statement in the time range.
Syntax
time-range time-range-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] |
from time1 date1 [ to time2 date2 ] | to time2 date2 }
undo time-range time-range-name [ start-time to end-time days [ from time1 date1 ] [ to time2
date2 ] | from time1 date1 [ to time2 date2 ] | to time2 date2 ]