49
remark drop-precedence
Use remark drop-precedence to configure a drop priority marking action in a traffic behavior.
Use undo remark drop-precedence to restore the default.
Syntax
remark drop-precedence drop-precedence-value
undo remark drop-precedence
Default
No drop priority marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
drop-precedence-value: Specifies the drop priority to be marked for packets, in the range of 0 to 2.
Usage guidelines
A traffic behavior that includes a drop priority marking action can be applied only to the inbound
direction.
If you execute the remark drop-precedence command multiple times in the same traffic behavior,
the most recent configuration takes effect.
Examples
# Configure traffic behavior database to mark matching traffic with drop priority 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark drop-precedence 2
remark dscp
Use remark dscp to configure a DSCP marking action in a traffic behavior.
Use undo remark dscp to delete the action.
Syntax
remark [ green | red | yellow ] dscp dscp-value
undo remark [ green | red | yellow ] dscp
Default
No DSCP marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
green: Specifies green packets.
To Next Page
Loading...
