106
Aggregate CAR commands
car name
Use car name to use an aggregate CAR action in a traffic behavior.
Use undo car to restore the default.
Syntax
car name car-name
undo car
Default
No aggregate CAR action is configured in a traffic behavior.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
car-name: Specifies the name of an aggregate CAR action. This argument must start with a letter,
and is a case-sensitive string of 1 to 31 characters.
Examples
# Use aggregate CAR action aggcar-1 in traffic behavior be1.
<Sysname> system-view
[Sysname] traffic behavior be1
[Sysname-behavior-be1] car name aggcar-1
Related commands
display qos car name
display traffic behavior user-defined
display qos car name
Use display qos car name to display information about aggregate CAR actions.
Syntax
display qos car name [ car-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
To Next Page
Loading...
Need help?
General